Dynamic microphone 4PIN x SUPER-STAR / COBRA / PRESIDENT
Dynamic microphone 6PIN with UP&DOWN x PRESIDENT / ALAN / MIDLAND
Add to compare0
Add to wishlist
-
6 Pin Aerial Connector
-
Up&down button for Channel Change & volume knob
-
Cable extended length: 2.3m
-
Cable diameter: 4.5mm
EAN:8435757701801
Related Products
No items
15 other products in the same category:
CB Microphone with connector 6Pin.
Function: Up & Down
Electret microphone capsule (central Pin with voltage)
Warning: You should not replace a dynamic microphone with an electret and vice
Genuine President CB radio Microphone 6 pin with up and down to suit the following radio's:
ANDY, BARRY AM/FM, BARRY-II, BARRY-II+, BILL, BILL-II, GRANT-II ASC, HARRY (without Up/Down function), HARRY (ASC & Classic), HARRY-III, HENRY ASC Classic, JACKSON II, JFK II, JIMMY II ASC (without Up/Down function), JIMMY III, JOHNNY/JOHNNY ASC (without Up/Down function), JOHNNY II, JOHNNY III, JOHNSON II, LINCOLN II ASC, RONALD, TAYLOR II Classic, TAYLOR II Classic, TAYLOR III ASC, TAYLOR IV, TEDDY ASC (without Up/Down function), TOMMY, TRUMAN, WALKER, WALKER II.
Compatible with all current PRESIDENT CB radios with 6-pin for CB and 10 meters.
President microphone with 6-pin connector and channel up / down.
Original President microphone for 6-pin CB radio with up and down function, compatible with the following radios:
ANDY, BARRY AM/FM, BILL, BILL-II, GRANT-II ASC, HARRY, HARRY (ASC& Classic), HARRY-III, HENRY ASC Classic, JACKSON II, JFK II, JIMMY II ASC, JOHNNY/JOHNNY ASC, JOHNNY II, JOHNNY III, JOHNSON II, LINCOLN II ASC, RONALD, TAYLOR II Classic, TAYLOR II Classic, TAYLOR III ASC, TAYLOR IV, TEDDY ASC, TOMMY, TRUMAN, WALKER, WALKER, II.
CB Microphone with connector 6Pin
Electret microphone capsule (central Pin with voltage)
Warning: You should not replace a dynamic microphone with an electret and vice
Compatible con todas las radios actuales de PRESIDENT de 6 pines para CB y 10 metros.
Dynamic microphone 6PIN x PRESIDENT / ALAN / MIDLAND
Dynamic microphone 6PIN x ALAN / PRESIDENT / UNIDENT
Dynamic microphone 4PIN, reinforced x ALAN / MIDLAND
The President Digimike microphone with NCR (Noise reduction circuit), is designed for its modulation to be as clear as possible in all modes (AM/FM/SSB), eliminating background noise. Has 5 filtering levels.
Compatible with PRESIDENT radios CB 6 pins:ANDY, BARRY AM/FM, BARRY II, BARRY II+, BILL, BILL II, GEORGE /GEORGE Classic (sin función Up/Down), GRANT II, HARRY / HARR II, HARRY-III, HENRY ASC, Herbet New, JACKSON, JACKSON-II, JAMES, JFK, JFK II, JIMMY, JIMMY-II, JIMMY III JOHNNY /JOHNNY ASC, JOHNNY II, JOHNNY III, JOHNSON II, JOHNSON III, LINCOLN II ASC, RONALD, TAYLOR, TAYLOR II Classic, TAYLOR III, TAYLOR IV (sin función Up/Down), TEDDY ASC (sin función Up/Down), TOMMY, TRUMAN, VALERY classic (sin función Up/Down), WALKER, WALKKER II.
Customers who bought this product also bought:
Duplexer 1.6-150 & 400-460MHz, without cable
Frequency Range: 7-30/50MHz
Type: Portable (loaded 1/4 wave on HF & true 1/4 wave on 50Mhz)
Maxim Power Level: 130W (SSB)
Maximum adhesion9 cm diameter, extra-flatSO-239 connectorRG-58 cable (5mts)
Frequency: 26-28 MHz
Installation Version
Original President microphone for 6-pin CB radio with up and down function, compatible with the following radios:
ANDY, BARRY AM/FM, BILL, BILL-II, GRANT-II ASC, HARRY, HARRY (ASC& Classic), HARRY-III, HENRY ASC Classic, JACKSON II, JFK II, JIMMY II ASC, JOHNNY/JOHNNY ASC, JOHNNY II, JOHNNY III, JOHNSON II, LINCOLN II ASC, RONALD, TAYLOR II Classic, TAYLOR II Classic, TAYLOR III ASC, TAYLOR IV, TEDDY ASC, TOMMY, TRUMAN, WALKER, WALKER, II.
Impedance: 50 Ohm
Relation: 1:1
Weight: 200gr
Suitable for radio Iris Etech IP-60 and multiple versions of radios working in 80MHz with SMAF connector (SMA female).
TX: 50/144/430/900/1200
RX: 25 ~1300 MHz Continuous Coverage
Fiberglass base antenna 50-144-430, 350W , 2 sections, 2500MM., 350W
Switching power supply 25AMP with battery-charger connection + 2 instruments + output voltage regulable from 4,0V-16V (DC).
Dynamic microphone 6PIN x PRESIDENT / ALAN / MIDLAND
Power inverter 300 W.12V + USB connector. Blister packing.
✓ ECE R10 Approval