Compatible with Motorola terminals that use the DP-2000 type connector
Escort kit for maximum discretion.
Compatible con:
MOTOROLA
DP Series: DP2000, DP2400, DP2400E, DP2401, DP2600, DP2600E, DP2601, DP3441, DP3441E, DP3661, DP2X0Y
DEP Series: DEP550, DEP570.
MTP Series: Tetra MTP3000/ 3100/ 3150/ 3200/ 3250/ 3500/ 3550/ MTP3150/ MTP3200/ MTP3250.
XiR/XPR: XiR P6600, XiR P6608, XiR P6620, XiR P6628, XPR3000, XPR3300, XPR3500.
NC-PRO-QD-DP2000
Professional and rugged Noise-Cancelling Headset 25dB + "Quick Disconnect" Connector for Motorola DP2000

Compatible with Motorola terminal series:
-
R5
-
DP Series: DP2000, DP2400, DP2400E, DP2401, DP2600, DP2600E, DP2601, DP3441, DP3441E, DP3661, DP2X0Y
-
DEP Series: DEP550, DEP570.
-
MTP Series: Tetra MTP3000/ 3100/ 3150/ 3200/ 3250/ 3500/ 3550/ MTP3150/ MTP3200/ MTP3250.
-
XiR/XPR: XiR P6600, XiR P6608, XiR P6620, XiR P6628, XPR3000, XPR3300, XPR3500.
For other color headset versions please ask
Komunica PWR ® has been validated by Motorola® for the production of Komunica ® audio accessories, 100% compatible with DP2000, R5, etc.
Important: Make sure that Motorola terminal firmware is updated to at least version 2022.02 or later.
Available in different colours. Please ask for colour availability.
Add to compare0
Add to wishlist
-
High noise attenuation (25 dB) for high-noise environments
-
Gel-padded earcups for greater comfort and noise isolation
-
Integrated PTT button on the earpiece and in-line PTT
-
Flexible gooseneck microphone with wind protection (microphone foam)
-
Compatible with certified safety helmets
General specifications:
-
Signal-to-noise ratio (SNR) at 25 dB
-
Operating temperature: -20 ℃ ±2 ℃ ~ 50 ℃ ±2 ℃
-
Weight: 540 g
-
Quick release type cable connector
-
In-line and helmet-mounted PTT
Speaker specifications:
-
Speaker dimensions: Φ44.6 x 8.3 mm
-
Impedance: 8 Ω ±15% @ 1.0 Hz / 1.0 V
-
Rated input power: 2.0 W
-
Maximum input power: 3.0 W
-
Sound pressure level (SPL): 86 dB ±3 dB
-
1 W, 0.5 m average
-
@ 1, 1.2, 1.5, 2 kHz
-
Frequency response: 300 Hz ~ 18 kHz, average SPL -10 dB
-
Distortion: 5% max. @ 1000 Hz / 1 W
Microphone specifications:
-
Type and dimensions: condenser microphone, Φ9.7 x 5.0 mm
-
Output impedance: 2.2 kΩ ±10% f = 1 kHz
-
Sensitivity: -44 dB ±4 dB (-44 ±3) [0 dB = 1 V/Pa, 1 kHz]
-
Frequency range: 50 Hz ~ 10 kHz
-
Directivity: unidirectional
-
Voltage:
-
Standard voltage: 2 V
-
Maximum operating voltage: 10 V
-
Signal-to-noise ratio: 58 dB @ f = 1 kHz, Pin = 1 Pa weighted network