Electrical Power Supply
Switch mode step-down DC-DC converter.
Voltage Reducer 24 to 12 V
Output power (continuous): 20 Amp.
AV-825-Z (0-24 A) Switching Power Supply
Power inverter 300 W.12V + USB connector. Blister packing.
✓ ECE R10 Approval
This highly efficient DC-AC inverter converts 24 Volts DC to 1100 Watts of pure sine wave AC power at 230 Volts, 50 or 60 Hz.
The unit is having heavy duty hex screw M8 connection.
Features include overload protection, low battery alarm / shut down, low idle power draw of less than 0.7 Amps. AC power is available from a single standard 2x VDE European outlet, accessible on the front panel
Switch mode step-down DC-DC converter.
Voltage Reducer 24 to 12 V
Output power (continuous): 30 Amp.
Advanced switch-mode technology & Reliable power with minimum weight and size
Power inverter 300 W. 24V + USB connector. Blister packing.
✓ ECE R10 Approval
This highly efficient switch mode step-up DC-DC converter converts an input voltage of 12 VDC nominal (range 9 VDC to 18 VDC) to a highly regulated output voltage of 24 VDC nominal (24,7 VDC) at 10 Amps. The STEP 10 DC-DC converter is non-isolated (no galvanic isolation between input and output) and meant for use in negative ground systems.
This highly efficient DC-AC inverter converts 12 Volts DC to 1600 Watts of pure sine wave AC power at 230 Volts, 50 or 60 Hz.
The unit is having heavy duty hex screw M8 connection.
Features include overload protection, low battery alarm / shut down, low idle power draw of less than 1.6 Amps. AC power is available from a single standard 2x VDE European outlet, accessible on the front panel.
Advanced switch-mode technology & Reliable power with minimum weight and size
AV-5045-Z - Switched Power supply 20A (24 V) -45 A (12 V). Adjustable, extra-large, with instruments.
Power inverter 400 W. 12V + USB connector.
✓ ECE R10 Approval
This highly efficient DC-AC inverter converts 24 Volts DC to 1600 Watts of pure sine wave AC power at 230 Volts, 50 or 60 Hz.
The unit is having heavy duty hex screw M8 connection.
Features include overload protection, low battery alarm / shut down, low idle power draw of less than 1.1 Amps.
This unit is a solid-state device which allows uninterrupted DC power in association with a power supply and a battery. The transfer of load between the power supply and the battery is instantaneous.
It also keeps the battery charged by providing float charge.
Power Supply Swithching Noise Filter & instruments
Power inverter 400 W. 24V + USB connector
Showing 21-40 of 66 item(s)