Vertex / Yaesu RJ-45 / RJ-45 connection cable
-
Microphone: High Sensitivity Ceramic MIC. Element 1 pc
-
Compressor Level: High: 45 dB, Med: 30 dB, Low: 10 dB
-
S/N Ratio (Graphic Equalizer Part): 80dB
-
Distortion Factor (Graphic Equalizer Part): 0.05% (at flat)
-
Graphic Equalizer: 4 elements (270,540,1000,2000Hz)+12dB range
-
Output Voltage: COMP: 0- 30mV (RMS)
-
Matching Output Impedance: 500 ohms – 100K ohm
-
Power Voltage: DC 6~9 V
-
Current Consumption: At Equalizer “OFF” Receiving: 3.5mA, Transmitting: 4.5mA
-
At Equalizer “ON” Receiving: 10mA, Transmitting: 11mA
-
Alarm Sound: Approx. 4.5KHz Intermittent Tone
-
External Size: 227 X 130 X 320 mm
-
Weight: 1000gr
-
As standard, it is supplied with cable compatible with Kenwood equipment (PWR-73-K).
EAN:8435757700958
Related Products
8Pin connecting cable for Yaesu, for AV-908
9 other products in the same category:
Compatible with Kenwood radios like TK7180
Desk Microphone series with high quality microphone unit, provides a superb audio quality.
Designed for Base Station operations.
Yaesu 8 Pin Connection Cable for AV-508
Vertex / Yaesu RJ-45 / RJ-45 connection cable
8Pin connecting cable for Yaesu, for AV-908
Customers who bought this product also bought:
Versión High capacity, compatible with Motorola series XT-420 & XT-460
Voltage: 3.7V
Capacity: 3.350mAh,
Li-Ion
Compatible with:
VERTEX STANDARD / YAESU
VX-110 /120/127/130/146/150/160/168/170/177/180 / FT60R/E / FT-270
VX-210 /246 /400/410/414/417/418/ VX-420A/424/427/428/ VX-800 FT-60R /250/250R / HX-270S/370S/500S/600S
VXA-150 / 200 Aviator Pilot II/ 210/220 Pro VI/ 300 Pilot III, etc
FTA-230 / 310
HX-270S / 370S / 500S / 600S, etc
SWR & Watt meter 1.8-160/430-1300 MHz. 200 W
Compatible with
ICOM IC-E90 /IC-T90A, 7,4V, 1400mAh, Li-ion
Surface base with conector PL female in angle Komunica C-4, with 4 m of cable RG-58 ideal for installation in chasis de vehículo or soporte.
Switching Power Supply, 25A continuos + DIGITAL PANEL. Extraflat version.
High quality Micro-earphone provides absolute audio clearity, with ear hook, coil cord and metal clip available to rotate by 360º
KENWOOD
PMR:UBZ-LJ9SETTK-3401, 3501, 3701D, TK-272G/372G, TK3130 ProTalk XLS, XLS, TK-3131 Free Talk XLSPKT-300Series: 60, 70, 160, 170, 202, 3201, 302, 3301, 360, 312, 000, NX Digital, D40 para Walkie Talkie KenwoodTK-3301E, TK-3302, TK-2360, TK-3360, TK-2000, TK-3000, TK-2302E, TK-3302E, TK-2312, TK-3312, TK-2170E3, TK-3170E3, TK-2170E, TK-3170E, TK2160E, TK3160E, TK-2202E, TK-3201, TK-260, TK-360, TK-270, TK-370, TK-3400, FK-3401 - DE, TK-3401-DT, TK-3402, TK-3501-E, TK-3501-T, TK-5320, TK-5400, TK-5410
DMR:NX-1200/1300NX-3320E, NX-3220E, NX-1300DE, NX-1200DENX-220E, NX-320E, NX-220E2, NX-320E2, NX-220E3, NX-320E3, TK-D240, TK-D340...
TEAM, WOUXUN, etc....
Compatible 7.2V, 2200mAh N-Mh, for GP-900/1200/ HT-1000/MT-2000/MTX-2000/8000/9000/838/MTS-2000/MTZ-2000
Impedance 50 OhmRelation: 1:1Power: 500WLength: 12cm
Ideal for trunk or door.
Its 3 axis, provide optimal anchorage and adhesion to the vehicle chassis to offer low ROE and good antenna performance.
Antenna for walkie VHF-UHF, RX 120,150,300,800 Y 900 MHZ, 2.15 dbi A 430Mhz.,10W, SMA
Fiberglass base antenna 144-430MHZ, 1300mm, 150W
N connector
RX also in 300MHz
Compact, with reinforced cable and rotating metal clamp
Compatible with:
KENWOOD
PMR:UBZ-LJ9SETTK-3401, 3501, 3701D, TK-272G/372G, TK3130 ProTalk XLS, XLS, TK-3131 Free Talk XLSPKT-300Series: 60, 70, 160, 170, 202, 3201, 302, 3301, 360, 312, 000, NX Digital, D40 para Walkie Talkie KenwoodTK-3301E, TK-3302, TK-2360, TK-3360, TK-2000, TK-3000, TK-2302E, TK-3302E, TK-2312, TK-3312, TK-2170E3, TK-3170E3, TK-2170E, TK-3170E, TK2160E, TK3160E, TK-2202E, TK-3201, TK-260, TK-360, TK-270, TK-370, TK-3400, FK-3401 - DE, TK-3401-DT, TK-3402, TK-3501-E, TK-3501-T, TK-5320, TK-5400, TK-5410
DMR:NX-1200/1300NX-3320E, NX-3220E, NX-1300DE, NX-1200DENX-220E, NX-320E, NX-220E2, NX-320E2, NX-220E3, NX-320E3, TK-D240, TK-D340...
TEAM, WOUXUN, etc.
RetevisRT24, RT28, RT46, RT15, RT22, RT24, RT27, RT7, RT5R,...
Adaptor double PL female (SO-239) - longe bushing type