SAMLEX rack base station for Hytera HR655, Kenwood NXR-1700/1800E repeaters.
Compatible with all SEC Series, including Battery Backup solutions, SEC-1125G-BBM
Advanced switch-mode technology & Reliable power with minimum weight and size
Add to compare0
Add to wishlist
-
Input Voltage: 115-230Vac, 50-60Hz
-
Output Voltage: 13,8 Vdc ± 1%
-
Output Ripple & Noise: <120 Mv Peak - Peak
-
Output Current Continous: 9,5 Amp
-
Current Limiting: 10 Amp
-
Cooling: Convection
-
Protections: Short circuit - Overload - Reverse polarity - Over Temperature
-
Connections:
- AC Input
- DC Output
- Detachable power cord with European schuko plug terminals with tubular hole (5mm) with set screw
-
Operating Temperature: 0-40ºC
-
Dimentions (L·W·H): 190·180·60 mm
-
Weight: 1’45 Kgs
-
Standards: EN 61000-6-3 EN 61000-6-2 EN 61000-3-2 EN 61000 -3-3 EN 60950
-
Energy Efficiency Certification: CEC / DOE / MEPS
-
Safety Standard: UL60950-1 EN60950-1 (ETL)
-
EMI Standard: EN55022 class-B EN61000-3-2,3
-
EMS Standard: EN61000-4-2,3,4,5,6,8,11
-
FCC: Part 15 subpart B class B
-
C-Tick: AN/NZS CISPR22 class B
Related Products
Easily convert 2 pcs of your Samlex power supply into a 19″ 2U rack mount version.
Compatible with SEC series: 1212/1223/1235G/2412G
Integrates your Samlex power supply with ICOM radios
Compatible with SEC series: 1212/1223/1235G/2412G
Version dual cabinet
This unit is a solid-state device which allows uninterrupted DC power in association with a power supply and a battery. The transfer of load between the power supply and the battery is instantaneous.
It also keeps the battery charged by providing float charge.
Integrates your Samlex power supply with KENWOOD radios.
Compatible with SEC series: 1212/1223/1235G/2412G
Integrates your Samlex power supply with Motorola radios.
Compatible SEC: 1212/1223/1235G/2412G
Integrates your Samlex power supply with ICOM radios.
Compatible SEC: 1212/1223/1235G/2412G
11 other products in the same category:
Advanced switch-mode technology & Reliable power with minimum weight and size.
Integrates your Samlex power supply with ICOM radios
Compatible with SEC series: 1212/1223/1235G/2412G
Version dual cabinet
SAMLEX rack base station for Hytera HR655, Kenwood NXR-1700/1800E repeaters.
Compatible with all SEC Series, including Battery Backup solutions, SEC-1125G-BBM
Easily convert 2 pcs of your Samlex power supply into a 19″ 2U rack mount version.
Compatible with SEC series: 1212/1223/1235G/2412G
Integrates your Samlex power supply with KENWOOD radios.
Compatible with SEC series: 1212/1223/1235G/2412G
SAMLEX 25Amp 13.8V Switching Power Supply. Ultra-Slim with BACKUP Module
Advanced switch-mode technology & Reliable power with minimum weight and size
Advanced switch-mode technology & Reliable power with minimum weight and size
Integrates your Samlex power supply with ICOM radios.
Compatible SEC: 1212/1223/1235G/2412G
Integrates your Samlex power supply with Motorola radios.
Compatible SEC: 1212/1223/1235G/2412G
This unit is a solid-state device which allows uninterrupted DC power in association with a power supply and a battery. The transfer of load between the power supply and the battery is instantaneous.
It also keeps the battery charged by providing float charge.
Customers who bought this product also bought:
Compatible con:
MOTOROLA
GP-140/240/ 280/ 320/ 330/ 338/ 340/ 360/ 380/ 580/ 640 PRO SERIES HT-750/ 1250/ 1550/ MTX450/ 900/ 960/ PRO5150/ 5550/ 7150/ 9150
Frequency: DC~1GHz
V.S.W.R: < 1,19 at Full Range
Conector: PL-259 Male
Power: Continuous 35W / Peak 200W
Battery-Pack Komunica Li-Ion, compatible Vertex Series VX-820/350/351/354/359. etc
Compatible con:
KENWOOD NEXEDGE Series:
- NX-1200/1300
- NX-3320-E/E2/E3
- NX-3220-E/E2/E3
- NX-220/320 radio.
Compatible clip with Kenwood batteries TK and NX series
Frequency: DC~3GHz
V.S.W.R: < 1.19 at Full Range
Conector: N Type Male
Power: Continuous 30W / Peak 150W
Important:
The DSK-STP9000-PSU-1/6, 9 Amp power supply, is essential whenever you want to join at least 2 or more modules of our DSK-STP9000 charger.
Allowing up to a maximum of 6 modules / slots.
Compatible clip with Kenwood batteries KNB-29, KNB-30 and KNB-45
Hinged Mobile Ham Antenna.
Solid design, ideal for outdoor & 4x4
Compatible with:
Hytera series POC: PNC-360, PNC-380, NC-550 & BP-365
Speaker-Microphone compact size
Revolving Metal Clip
Reinforced Cable
Connector 3.5mm for external earphone
Level IP: IPX4
Compatible to:
HYTERA Series:
PD-405, PD-415, PD-505, PD-508, BD-555, PD-565, BD500, BD505, BD505LF, BD612i, BD615, BD556. BD566, BD-615
TC-446S, TC-500, TC-508, TC-510, TC-518, TC-580, TC-600, TC-610, TC-618, TC-620, TC-626, TC-700, TC-700EX, TC-1600, POWER446, TR-200, TR-400 TITAN.
BD-555,
ZODIAC D80 y D400
TX: 50/144/430/900/1200
RX: 25 ~1300 MHz Continuous Coverage
Compatible with:
MOTOROLA MOTOTRBO DMR: DP3400, DP3401, DP3600, DP3601 DP3601APX, DP4400, DP4401, DP4600, DP4601, DP4800, DP4801. DGP4150, DGP5050, DGP5550, DGP6150, DGP8050, DGP8550, XPR4500, XPR4550, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7550. MTP-6550-6750, MTP830S, MTP830 FUG, MTP850S, MTP850 FUG.
Compatible with:
MOTOROLA GP300, DP-1400, SP50, P110, P-1225/P1225LS, LTS2000, CP88, CP150, CP200, CT150, CT250, CT450, CT450LS, GP308, P080, P2000, PRO2150, PRO3150, P040, P080, GP68, GP88, PR400... etc. radio,HLN9716, HLN9482A... etc.
XT420/460XT/ XTN446
ALAN/MIDLAND series G-15/G-18
HYTERA series TC-500/600/2100/1600
YAESU: FT-4XE / FT-25E
ABELL: A580T
Compatible with Motorola series:
Serie MTM: MTM-800, MTM-5200, MTM-5400
Serie DM: DM3400, DM3401, DM3600, DM3601, DM4400, DM4600
Serie DGM: DGM4100, DGM4100, DGM6100, DGM6100+
Serie XiR: XiRM8200, XiRM8220 XiRM8228, XiRM8260, XiRM8268, XiRM8620, XiRM8660
Serie XPR: XPR4300, XPR4350, XPR4500, XPR45XiR, XPR4580, XPR5350, XPR5380, XPR5550E, XPR5580, XPR8300
Ergonomic lapel PTT microphone with lightweight ear-hanger, with modern design & soft/flex materials.
For a comfortable fitting, includes 3 sizes internal eartips that can be adapted or not. Coiled cable.
Compatible with MOTOROLA:
R-7
MXP-600, MXP-660
Komunica PWR ® has been fully approuved by Motorola ® to produce audio accessories 100% compatible with their series MXP600 & R7.
Important: Make sure that the firmware of the Motorola terminals has been updated to version 2022.02 or later.