In-line PTT Microearphone
In-line PTT Microearphone with L-shaped Connector.
Add to compare0
Add to wishlist
Features:
-
IP: 54
-
In-line PTT
-
Operating Temperature: -20℃± 2℃ ~ 50℃± 2℃
-
Weight: Approx. 30g
Earpiece
-
Earpiece Dimensions: Φ 13.0 × 2.7 mm
-
Impedance: 32 Ω ± 15% @ 1kHz, 0.179V
-
Rated Input Power: 3mW
-
Max. Input Power: 5mW
-
Sensitivity: 122dB ± 3dB 179mV @ 1KHz, 1cm
-
Frequency Response: FO ~ 20KHz
-
Distortion: <5% @ 50Hz ~ 8KHz, 0.001W
Microphone
-
Type and Dimensions: Condenser Type, Dimension = Φ 6 × 5.0 mm
-
Output Impedance: 2.2KΩ ± 10% @ 1KHz
-
Sensitivity: -40dB ± 2dB, 0dB = 1V/Pa, 1KHz
-
Frequency Range: 50Hz ~ 10KHz
-
Directivity: Omni-directional
-
Operating Voltage: Standard Voltage 2V, Max. Operating Voltage 10V
-
S/N Ratio: 58dB @ 1KHz, Pin=1 Pa, A-weighted
Related Products
3 sizes x set
Silicone material
16 other products in the same category:
Ergonomic PTT microphone with Reinforced & coiled cable and acoustic tube
Compatible with MOTOROLA:
MXP-600, MXP-660
R7
Komunica PWR ® has been fully approuved by Motorola ® to produce audio accessories 100% compatible with their series MXP600 & R7.
Important: Make sure that the firmware of the Motorola terminals has been updated to version 2022.02 or later.
Discreet version, with acoustic tube, reinforced cables and flap PTT.
Compatible with:
Hytera series: BP565/515
AP515, AP515 LF, AP525 LF, AP585, BP515, BP515 LF, BP565, etc
Ergonomic PTT microphone with Reinforced & coiled cable
In-line PTT Microearphone
Compatible Motorola PMR CLP-446, CLP1010,CLP1040,CLP1060
Ergonomic PTT microphone with Reinforced & coiled cable.
Earhanger: EH6 surface shape.
Hytera series POC: PNC-360, PNC-380, NC-550 & BP-365
PWR-GES-IP-ICF62 - Micro-earphone Komunica with protection level IPX7, compatible with Icom ICF52/62
Komunica professional micro-earphone IPX7 (1m during 30 minutes) with multi-pin (14 Pin) connector, compatible to Icom:
IC-F-52D/62D
IC-F-3261D/3262D/3263D/IC-F3360D/4261D/4262D/IC-F4360D/4363D
IC-SAT-100
IC-F-3400D/3400DS/3400DT/4400D/4400DS/4400DT
IC-F-7010S / 7020S / 7020T / 7040T /IP730D/IP740/ 9011 / 9021
IC-M85 / M85E
Ergonomic PTT microphone with Reinforced & coiled cable.
Hytera series POC: PNC-360, PNC-380, NC-550 & BP-365
Ergonomic lapel PTT microphone with lightweight ear-hanger, with modern design & soft/flex materials.
For a comfortable fitting, includes 3 sizes internal eartips that can be adapted or not. Coiled cable.
Compatible with MOTOROLA:
R-7
MXP-600, MXP-660
Komunica PWR ® has been fully approuved by Motorola ® to produce audio accessories 100% compatible with their series MXP600 & R7.
Important: Make sure that the firmware of the Motorola terminals has been updated to version 2022.02 or later.
Discreet version, with acoustic tube, reinforced cables and flap PTT.
Ergonomic PTT microphone with Reinforced & coiled cable
Compatible with:
PH600,DH500, DDH400, DH410, DH450/ DH452, DH405Ex, DH415Ex, DH455Ex,
DH500, DH590, DH596,
DH610, DH612, DH630, DH680, DH682, DH636
PH660Ex, PH690Ex, PH600, PH660, PH690, PH600Ex
E600
New version of connector for series CLP-e Motorola
Ergonomic PTT microphone with Reinforced & coiled cable.
Earhanger: EH9
Ergonomic PTT microphone with Reinforced & coiled cable.
Compatible with SEPURA:
SCL3
Serie SC20/SC21/ SC23
STP 9000, STP 9100, STP 9200, etc.
STP-8000, STP-8100, STP-8200, STP-8038, STP-9038, etc.
Compatible with Hytera radios:
PD-600, PD-602, PD-605, PD-606, PD-665, PD-666, PD-685, PD-686, TC700-P / TC-780, Digital X1p, X1e, Z1p.
PDC550, PDC680, PDM680, PTC680, PT-590
HP505, HP565, HP605, HP685, HP705, HP785, HP9xx
HP-605, etc
Multi Pin connector (13 contact points)
Acoustic tube with water proof level IPX7 (1 m during 30 minutes) and multipin connector (14 Pin) compatible series Icom:
IC-F-52D/62D
IC-F-3261D/3262D/3263D/IC-F3360D/4261D/4262D/IC-F4360D/4363D
IC-SAT-100
IC-F-3400D/3400DS/3400DT/4400D/4400DS/4400DT
IC-F-7010S / 7020S / 7020T / 7040T /IP730D/IP740/ 9011 / 9021
IC-M85 / M85E
Ergonomic PTT microphone with Reinforced & coiled cable