Compatible with:
VERTEX STANDARD / YAESU
VX-110 /120/127/130/146/150/160/168/170/177/180
FT60R/E /FT-120 / FT-250 / FT-270
VX-210 /246 /400/410/414/417/418/ VX-420A/424/427/428/ VX-800 FT-60R /250/250R / HX-270S/370S/500S/600S
VXA-150 / 200 Aviator Pilot II/ 210/220 Pro VI/ 300 Pilot III, etc
FTA-230 / 310
HX-270S / 370S / 500S / 600S, etc
Rapid desk-charger for Vertex Yaesu, designed to be used with Li-Ion battery packs when either attached to or removed from the transceiver.
Suitable for batteries FNB-V67 in Li-Ion
Add to compare0
Add to wishlist
Related Products
16 other products in the same category:
Compatible Rapid desk-charger Komunica for Kenwood, designed for use with Li-ion battery packs
Single 1+1 desktop charger for CP-040, DP-1400, R2
Desktop Fast Charger for AP-6574-Li BatteryCompatible with Motorola: MTP850 / MTP830 / MTP800 / CEP-400 , etc
Single tri-chemistry desktop charger for Simoco SRP9100 with 230V EU PSU
Desktop Fast Charger for AP-5705-Li Battery
Compatible with Motorola: MTH650, MTH800
Rapid desk-charger suitable for Motorola , series AP-4066-Li & AP-4065-H
Innovative modular system that allows adding up to a maximum of 6 slots.
The DSK-STP9000 in a single slot version, requires the power supply Ref: DSK-STP9000-PSU-1 of 1.5 Amps (not included)
On the other hand, for versions between 2/6 slots, it requires the power supply Ref: DSK-STP9000-PSU-1/6 of 9.0 Amps (not included)
Compatible for series Sepura STP9000 / STP8000
Desktop Fast Charger 6 + 6 slots AP-6574-Li Batteries
Compatible with Motorola: MTP850 / MTP830 / MTP800 / CEP-400, etc.
Rapid desk-charger for Motorola designed for use with Li-ion, Ni-CD and Ni-MH battery pack when either attached to or removed from the transceiver.
Slow charger 220V AC
Voltage: 15 V. DC
Vehicle charger for KNB-57Li & KNB-55 batteries
Suitable for Motorola batteries: AP-4970-L, AP-4497-LI (High Capacity) & AP-4851H
Desktop rapid charger for KNB-57Li & KNB-55 batteries
Compatible with Kenwood equipment:
TK-3201, TK-3301, TK-2301, TK-2000, TK-3000, TH-K20, TH-K40 and the TK-3202 and any other walky models that use the KNB-45-Li battery
Important:
The DSK-STP9000-PSU-1 power supply is required for the Komunica modular charger, DSK-STP9000 version. Exclusive use for 1 single slot.
If you want to join 2 or more slots, up to a maximum of 6, you need to connect the DSK-STP9000-PSU-1/6 (9 Amp version).
Important:
The DSK-STP9000-PSU-1/6, 9 Amp power supply, is essential whenever you want to join at least 2 or more modules of our DSK-STP9000 charger.
Allowing up to a maximum of 6 modules / slots.
Customers who bought this product also bought:
Compatible with:
VERTEX STANDARD / YAESU
VX-110 /120/127/130/146/150/160/168/170/177/180
FT60R/E /FT-120 / FT-250 / FT-270
VX-210 /246 /400/410/414/417/418/ VX-420A/424/427/428/ VX-800 FT-60R /250/250R / HX-270S/370S/500S/600S
VXA-150 / 200 Aviator Pilot II/ 210/220 Pro VI/ 300 Pilot III, etc
FTA-230 / 310
HX-270S / 370S / 500S / 600S, etc
Integrates your Samlex power supply with ICOM radios.
Compatible SEC: 1212/1223/1235G/2412G
Duplexer 1.6-150 & 400-460MHz, without cable
Ideal for trunk or door
This multi-position bracket provides optimal anchorage and adhesion to the vehicle chassis to offer low ROE and good antenna performance.
HF Multiband antenna 80/40/30/20/17/15/12/11/10/6/2 + Air
Flexible whip and best performance:
Frequency Range: 144 / 430 Mhz
Impedance: 50 Ohms
Power: 10W
Length: 20,5cm
Weight: 29,40gr
Connector: SMA male
Compatible to:
VERTEX / YAESU
VX-351, VX-210, VX-210A, VX-241, VX-246, VX-230, VX-231, VX-260, VX-261, VX-264, VX-350, VX-351, VX-354, VX-410, VX-420, VX-427, VX-450, VX-451, VX-454, VX-459.
VX-150, VX-160, VX-180, EVX-531, EVX-534, EVX-539, etc.
TRIPLE-MAG- Komunica reinforced magnet base Maximum grip
Diameter: 3pcs x 9cm
Connector: SO-239
Cable RG-58 (5mts)
Desk microphone HF/VHF/UHF: compressor & meter
Duplexer 1.6-150 & 400-470MHz, with low loss cable
Compatible with:
VERTEX / YAESU
VX-450, VX-451, VX-454, VX-459 X1.
EVX 530 / 531 / 534 / 539
Impedance 50 OhmRelation: 1:1Power: 500WLength: 12cm
During your QRP outings, always take along the innovative RB-3WI (SO-239) support and attach it to your photographic tripod!!
The perfect match!!
Frequency Range
7 ~ 50MHz
Input resistance
500W(SSB)
Heat resistance
﹣20℃~90℃
Adsorption degree
below 110km/h(no wind)
Dimensions
80 x 195 mm (sheet body)
Wire length
about 20 cm
Weight
about 55 grams
(including wires and terminals)