Ensure optimal performance with this set of 3 ground connections, each 3 meters long, specifically designed for RB-3WI & MINI-TRIPOD systems.
Komunica MINI-TRIPOD with photographic thread pitch.
Combine it with our RB-3WI support (not inclouded) and get an easily portable mini tripod that will allow you to connect your HF antenna and make the best contacts.
Specifications
-
Material: Aluminum
-
Weight: 68g
-
Size: 15cm
Add to compare0
Add to wishlist
Related Products
During your QRP outings, always take along the innovative RB-3WI (SO-239) support and attach it to your photographic tripod!!
The perfect match!!
12 Bands ultralight HF portable antenna with telescopic whip.
Band coverage: 6/10/12/15/17/20/30/40/80/160 m (coil) + VHF + Air Band
Ideal QRP, SOTA, etc.
Innovative Komunica® HF-PRO-2-PLUS-T portable Wide Spectrum antenna:
3.5MHz (by included coil) + 7 / 30MHz + 40MHz + 50MHz + 70MHz + VHF
Maximum robustness, super-light and ultra-compact size:Mesurement: 29cm disassembled and 270cm maximum extension.
Ideal QRP, SOTA, etc. by telescopic tripod, magnetic base reinforced, etc AVAILABLE EXCLUSIVELY THROUGH OUR EUROPEAN DEALERS
Frequency Range: 7-30/50MHz
Type: Portable (loaded 1/4 wave on HF & true 1/4 wave on 50Mhz)
Maxim Power Level: 130W (SSB)
HF Multiband antenna 80/40/30/20/17/15/12/11/10/6/2 + Air
8 Bands Portable Antena (HF+2m+6m+Airband)
Wide band portable antenna 7-430MHz special for HF/50/144/430MHz
4 other products in the same category:
During your QRP outings, always take along the innovative RB-3WI (SO-239) support and attach it to your photographic tripod!!
The perfect match!!
It includes:
1 Extendable Telescopic Tripod 4 sections in Aluminium
1 Aluminum Sheet Plate with Professional Base SO-239
2 Kits of ground not tuned x 4 wires of 3m prepared for fixing by picks
1 pig-tail 5.5m of low-loss cable RG-58 for connecting the base (sheet plate) to the transceiver antenna connector (PL-259).
Various screws
Ensure optimal performance with this set of 3 ground connections, each 3 meters long, specifically designed for RB-3WI & MINI-TRIPOD systems.
Main Body Stake: Carbon Steel
Engraved Block: Aluminum 6 x 2.4 x 2.4 cm
L-Shaped Bracket: Stainless Steel
Length: 39.5 cm
Weight: 380 g
***Compatible with Komunica C-4 accessory (4m cable + SO-239 type base with nut).
Customers who bought this product also bought:
Ideal for trunk or door
Its 3 axis, provide optimal anchorage and adhesion to the vehicle chassis to offer low ROE and good antenna performance.
PL male for cable AIRCELL-7 (CRIMP TYPE)
Mobil antenna VHF-UHF, 100W, PL 470mm
Hinged Mobile Ham Antenna
This product has a new reference, until now it has corresponded to PWR-SRH-789
Telescopic antenna with hinge for walkie VHF-UHF, RX 95,120,150,300,800,900,1100 MHz, 2.15 dbi(95-300Mhz)Y 3.2 dbi(300-1100Mhz.), 805mm, folded 200mm. 6 sections, SMA
Advanced switch-mode technology & Reliable power with minimum weight and size
Impedance 50 OhmRelation: 1:1Power: 500WLength: 12cm
This product has a new reference, until now it has corresponded to PWR-SRH-775
Telescopic antenna for walkie VHF-UHF, RX 120,150,300,800 Y 900 MHZ, 2,15 dbi, 10W,410MM. Maximum Length: 41 cm extended and 14cm folded, 8 sections. SMA connector
Ensure optimal performance with this set of 3 ground connections, each 3 meters long, specifically designed for RB-3WI & MINI-TRIPOD systems.
Antenna for walkie VHF-UHF, RX 120,150,300,800 Y 900 MHZ, 10W, 220MM. SMA
This product has a new reference, until now it has corresponded to PWR-SRH-771-SMAF
Walkie-Talkie antenna, Dual Band, VHF-UHF
TX: 144~1200 MHz - (144, 430, 900, 1200 MHz)
New CB PRESIDENT radio, with 40 channels ASC, AM/FM
Polarized Parallel Power Cable 2.5mm with "T" Connector and 15A Fuse Holder.Ideal for VHF-UHF Mobile Equipment: Kenwood, Icom, Yaesu, Wouxun, etc.Length: 3m
Compatible Radios:
Kenwood: TM-201B, TM-241, TM-251, TM-261A, TM-271, TM-401B, TM-461/471, TM-742A, TM-2530A, TM-2550A, TM-2550E, TM-2570A, TM-D700A, TM-G707A, TM-V7A, TR-751A, TR-751E, TM-731, TM-732, TM-733, TM-741, TM-V7, TM-G707
Yaesu: FT-212, FT-1802, FT-1802M, FT-1807, FT-1807M, FT-7800R, FT-8800R, FT-8800
ICOM: IC-F111S, IC-F211S, IC-F510, IC-F2610, IC-F1610, IC-F1620TR, IC-FR3000, IC-FR4000
Compatible with equipment with T connector
