Main Body Stake: Carbon Steel
Engraved Block: Aluminum 6 x 2.4 x 2.4 cm
L-Shaped Bracket: Stainless Steel
Length: 39.5 cm
Weight: 380 g
***Compatible with Komunica C-4 accessory (4m cable + SO-239 type base with nut).
During your QRP outings, always take along the innovative RB-3WI (SO-239) support and attach it to your photographic tripod!!
The perfect match!!
Add to compare0
Add to wishlist
-
Antenna Connector: SO-239 (M16)
-
Tripod Connector: 1/4 thread standard
-
Version with cable: PL-259
-
Material: Stainless Steel
-
Weight: ≃ 240g
EAN:8435757708343
Related Products
Ensure optimal performance with this set of 3 ground connections, each 3 meters long, specifically designed for RB-3WI & MINI-TRIPOD systems.
Komunica MINI-TRIPOD with photographic thread pitch.
Combine it with our RB-3WI support (not inclouded) and get an easily portable mini tripod that will allow you to connect your HF antenna and make the best contacts.
Specifications
Material: Aluminum
Weight: 68g
Size: 15cm
Innovative Komunica® HF-PRO-2-PLUS-T portable Wide Spectrum antenna:
3.5MHz (by included coil) + 7 / 30MHz + 40MHz + 50MHz + 70MHz + VHF
Maximum robustness, super-light and ultra-compact size:Mesurement: 29cm disassembled and 270cm maximum extension.
Ideal QRP, SOTA, etc. by telescopic tripod, magnetic base reinforced, etc AVAILABLE EXCLUSIVELY THROUGH OUR EUROPEAN DEALERS
Frequency Range
7 ~ 50MHz
Input resistance
500W(SSB)
Heat resistance
﹣20℃~90℃
Adsorption degree
below 110km/h(no wind)
Dimensions
80 x 195 mm (sheet body)
Wire length
about 20 cm
Weight
about 55 grams
(including wires and terminals)
Frequency Range: 7-30/50MHz
Type: Portable (loaded 1/4 wave on HF & true 1/4 wave on 50Mhz)
Maxim Power Level: 130W (SSB)
HF Multiband antenna 80/40/30/20/17/15/12/11/10/6/2 + Air
8 Bands Portable Antena (HF+2m+6m+Airband)
Wide band portable antenna 7-430MHz special for HF/50/144/430MHz
Wide band portable antenna 7-430MHz special for HF/50/144/430MHz red colour
16 other products in the same category:
Ideal for trunk or door
Its 3 axis, provide optimal anchorage and adhesion to the vehicle chassis to offer low ROE and good antenna performance.
Antenna base support carrier type with PL connector
Ideal for trunk or door
This multi-position bracket provides optimal anchorage and adhesion to the vehicle chassis to offer low ROE and good antenna performance.
Ideal for trunk or door
This multi-position bracket provides optimal anchorage and adhesion to the vehicle chassis to offer low ROE and good antenna performance.
Its design provides an optimal anchorage and adhesion to the vehicle chassis to off er low ROE and good antenna performance.
Compact size, specially designed for small size mobile antennas.
Main Body Stake: Carbon Steel
Engraved Block: Aluminum 6 x 2.4 x 2.4 cm
L-Shaped Bracket: Stainless Steel
Length: 39.5 cm
Weight: 380 g
***Compatible with Komunica C-4 accessory (4m cable + SO-239 type base with nut).
Universal antenna bracket, ideal for roof-carrier & mirror stay bar - multiposition
Stainless steel
Surface base with conector PL female in angle Komunica C-4, with 4 m of cable RG-58 ideal for installation in chasis de vehículo or soporte.
Antenna base support carrier type with PL connector.
Ideal for trunk or door
Its 2 axis, provide optimal anchorage and adhesion to the vehicle chassis to offer low ROE and good antenna performance.
Customers who bought this product also bought:
Special WIDE BAND antenna for HF
Tx: 7-30 MHz + 50MHz (50-54MHz)
Rx: 3-70 MHz
Your Bazoka-Pro is a Pre-tuned antenna
PL male for cable AIRCELL-7 (CRIMP TYPE)
Compatible with:
KENWOOD
PMR:UBZ-LJ9SETTK-3401, 3501, 3701D, TK-272G/372G, TK3130 ProTalk XLS, XLS, TK-3131 Free Talk XLSPKT-300Series: 60, 70, 160, 170, 202, 3201, 302, 3301, 360, 312, 000, NX Digital, D40 para Walkie Talkie KenwoodTK-3301E, TK-3302, TK-2360, TK-3360, TK-2000, TK-3000, TK-2302E, TK-3302E, TK-2312, TK-3312, TK-2170E3, TK-3170E3, TK-2170E, TK-3170E, TK2160E, TK3160E, TK-2202E, TK-3201, TK-260, TK-360, TK-270, TK-370, TK-3400, FK-3401 - DE, TK-3401-DT, TK-3402, TK-3501-E, TK-3501-T, TK-5320, TK-5400, TK-5410
DMR:NX-1200/1300NX-3320E, NX-3220E, NX-1300DE, NX-1200DENX-220E, NX-320E, NX-220E2, NX-320E2, NX-220E3, NX-320E3, TK-D240, TK-D340...
TEAM, WOUXUN, etc.
RetevisRT24, RT28, RT46, RT15, RT22, RT24, RT27, RT7, RT5R, RT5RVH-777s
BaofengBF-888S, UV-5R, BF-88E
HYTERA:TC...
Compatible with:
MOTOROLA MOTOTRBO DMR: DP3400, DP3401, DP3600, DP3601 DP3601APX, DP4400, DP4401, DP4600, DP4601, DP4800, DP4801. DGP4150, DGP5050, DGP5550, DGP6150, DGP8050, DGP8550, XPR4500, XPR4550, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR7550. MTP-6550-6750, MTP830S, MTP830 FUG, MTP850S, MTP850 FUG.
CB Microphone with connector 6Pin.
Function: Up & Down
Electret microphone capsule (central Pin with voltage)
Warning: You should not replace a dynamic microphone with an electret and vice
TX: 144~1200 MHz - (144, 430, 900, 1200 MHz)
Antenna for walkie VHF-UHF, 210mm
RX: 150/300/450/800MHz
Conector: SMAFThe product code has been updated from PWR-SRH-519-SMAF to PWRT-TA-19-SMAF
Duplexer 1.6-150 & 400-470MHz, with low loss cable
Impedance 50 OhmRelation: 1:1Power: 500WLength: 12cm
PWR-TUB Acoustic Series Earpiece Replacement
Dynamic microphone 6PIN with UP&DOWN x PRESIDENT / ALAN / MIDLAND
Polarized 6-Pin Power Cable, 3m (5mm), with dual 30A fuse.Ideal for HF equipment:
YaesuFT-840, FT-847, FT-857, FT-857D, FT-897, FT-897D, FT-1000
IcomIC-706, IC-718, IC-725, IC-735, IC-746, IC-756 (all versions), IC-756 PRO3, IC-77
KenwoodTS-50, TS-120, TS-130, TS-140, TS-180, TS-430, TS-440, TS-450, TS-570, TS-680, TS-790, TS-850, TS-870, TS-2000, TRC-70, TK-80
AlincoDX-70, DX-701
Other brands with 6-pin Molex connector
Frequency: DC~1GHz
V.S.W.R: < 1,19 at Full Range
Conector: PL-259 Male
Power: Continuous 35W / Peak 200W
Frequency Range
7 ~ 50MHz
Input resistance
500W(SSB)
Heat resistance
﹣20℃~90℃
Adsorption degree
below 110km/h(no wind)
Dimensions
80 x 195 mm (sheet body)
Wire length
about 20 cm
Weight
about 55 grams
(including wires and terminals)