Mobile antenna VHF 1/4 strong spring, 200W, 510mm, PL, stainless steel type.
Related Products
16 other products in the same category:
Frequency Range
7 ~ 50MHz
Input resistance
500W(SSB)
Heat resistance
﹣20℃~90℃
Adsorption degree
below 110km/h(no wind)
Dimensions
80 x 195 mm (sheet body)
Wire length
about 20 cm
Weight
about 55 grams
(including wires and terminals)
It includes:
1 Extendable Telescopic Tripod 4 sections in Aluminium
1 Galvanized Iron Sheet Plate with Professional Base SO-239
2 Kits of ground not tuned x 4 wires of 3m prepared for fixing by picks
1 pig-tail 5.5m of low-loss cable RG-58 for connecting the base (sheet plate) to the transceiver antenna connector (PL-259).
Various screws
Universal antenna bracket, ideal for roof-carrier & mirror stay bar - multiposition
Stainless steel
Maximum grip12cm diameterDV connectorRG-58 cable (5mts)
Impedance: 50 Ohm
Relation: 1:1
Weight: 200gr
Jumping-cable 50 cm length, cable RG-58 + 2 connectors PL
TRIPLE-MAG- Komunica reinforced magnet base Maximum grip
Diameter: 3pcs x 9cm
Connector: SO-239
Cable RG-58 (5mts)
Ideal for trunk or door.
Its 3 axis, provide optimal anchorage and adhesion to the vehicle chassis to offer low ROE and good antenna performance.
BM-1-PL - Komunica professional base reinforced Maximum grip12cm diameter
SO- 239 connector (base)BNC-Male connector (end of cable)RG-58 cable (5mts)
Coil x 160 mts HF-EXPLORER-MINI
Reinforced professional base Komunica:
Maximum grip force due to strong Magnetic = 200Nw (approx)
Screws: 4 stainless steel
Diameter 12cm
Protective rubber of maximum thickness to ensure its durability.
Special version OPEN type, without cable and without connector.
Special for installation of professional antennas.
MAXIMUM GRIP
Customers who bought this product also bought:
Komunica telescopic rod, special for our antenna HF-PRO-2-PLUS-TMade of Stainless Steel.
Sections: 11
Length Pickup: 24cm / 9.45 inches
Extended Length: 218cm / 85.83 inches
Antenna for walkie VHF, 136-174 MHz, 50W, for ICOM Connector
Compatible series ICF-1000, IC-F3002, IC-F3021, F3022, F3023, F3010, F3011, F3020, etc.
Antenna for walkie UHF 440-470 MHz, 50W, for KENWOOD, Connector SMAF
Compatible with Vertex VX-924 / REXON RL-328S and several versions of radios working in 80MHz, with SMA connector (SMA male)
Special WIDE BAND antenna for HF
Tx: 7-30 MHz + 50MHz (50-54MHz)
Rx: 3-70 MHz
Your Bazoka-Pro is a Pre-tuned antenna
Innovative Komunica® HF-PRO-2-PLUS-T portable Wide Spectrum antenna:
3.5MHz (by included coil) + 7 / 30MHz + 40MHz + 50MHz + 70MHz + VHF
Maximum robustness, super-light and ultra-compact size:Mesurement: 29cm disassembled and 270cm maximum extension.
Ideal QRP, SOTA, etc. by telescopic tripod, magnetic base reinforced, etc AVAILABLE EXCLUSIVELY THROUGH OUR EUROPEAN DEALERS
Altavoz Exter. 2W con regulador volumen y filtro
Frequency: DC~1GHz
V.S.W.R: < 1,19 at Full Range
Conector: PL-259 Male
Power: Continuous 35W / Peak 200W
Micro Flexo Length: 12,5cm
Cable length: 4m
Universal antenna bracket, ideal for roof-carrier & mirror stay bar - multiposition
Stainless steel
Power Cord Cable Polarized, with 6Pin connector and length 3m (5mm), with double fusse of 30A.
Ideal for HF radio equipment like HF Yaesu: FT-857, FT-840, FT-900, FT-897...Kenwood like TS-120, TS-130...ICOM, etc