PWR-SW3N
Komunica Coaxial Antenna Switching 3 Positions PL, 800MHz
Frequency Range:
DC~1.5GHz
Power Range:
Dc~30MHz 1.5KW
30MHz~200MHz 1KW
200MHz~500MHz 500W
500MHz~1GHz 250W
1GHz~3GHz 150W
Insertion Loss:
Dc~500MHz <=0.05dB
500MH~1GHz <=0.10dB
1GHz~2GHz <=0.15dB
2GHz~3GHz <=0.20dB
Output Port 1/2 Isolation:
Dc~500MHz >=70dB
500MH~1GHz >=60dB
1GHz~2GHz >=55dB
2GHz~3GHz >=50dB
VSWR:
Dc~500MHz <=1.10
500MH~1GHz <=1.15
1GHz~2GHz <=1.20
2GHz~3GHz <=1.25
Connector Type:
Input Port 1 "N" Female
Output Port 3 "N" Female
EAN:8435757707742
16 other products in the same category:
Frequency Range
7 ~ 50MHz
Input resistance
500W(SSB)
Heat resistance
﹣20℃~90℃
Adsorption degree
below 110km/h(no wind)
Dimensions
80 x 195 mm (sheet body)
Wire length
about 20 cm
Weight
about 55 grams
(including wires and terminals)
Impedance: 50 Ohm
Relation: 1:1
Weight: 200gr
Universal antenna bracket, ideal for roof-carrier & mirror stay bar - multiposition
Stainless steel
It includes:
1 Extendable Telescopic Tripod 4 sections in Aluminium
1 Galvanized Iron Sheet Plate with Professional Base SO-239
2 Kits of ground not tuned x 4 wires of 3m prepared for fixing by picks
1 pig-tail 5.5m of low-loss cable RG-58 for connecting the base (sheet plate) to the transceiver antenna connector (PL-259).
Various screws
TRIPLE-MAG- Komunica reinforced magnet base Maximum grip
Diameter: 3pcs x 9cm
Connector: SO-239
Cable RG-58 (5mts)
Jumping-cable 50 cm length, cable RG-58 + 2 connectors PL
Coil x 160 mts HF-EXPLORER-MINI
Reinforced professional base Komunica:
Maximum grip force due to strong Magnetic = 200Nw (approx)
Screws: 4 stainless steel
Diameter 12cm
Protective rubber of maximum thickness to ensure its durability.
Special version OPEN type, without cable and without connector.
Special for installation of professional antennas.
MAXIMUM GRIP
BM-1-PL - Komunica professional base reinforced Maximum grip12cm diameterSO-239 connectorRG-58 cable (5mts)
Magnetic base super-grip
PL-259 connector
Maximum grip12cm diameterDV connectorRG-58 cable (5mts)
Ideal for trunk or door.
Its 3 axis, provide optimal anchorage and adhesion to the vehicle chassis to offer low ROE and good antenna performance.
Customers who bought this product also bought:
Mobil antenna VHF-UHF, 3db 144 Y 5.5 db 430, 100W, 430MM. PL
This product has a new reference, until now it has corresponded to PWR-SRH-40-S
Antenna for walkie VHF-UHF+RX en 800MHz, 10W, 420MM., malleable whip able to adapt to any shape, SMA
This product has a new reference; until now it has corresponded to PWR-SRH-607-SMAF Dual-band Antenna (VHF / UHF) specially designed for portable equipment. Extra-flexible lower section (2 segments)
Compact, with reinforced cable and rotating metal clamp
Compatible with:
VERTEX STANDARD / YAESU
VX-110 /120/127/130/146/150/160/168/170/177/180 / FT60R/E / FT-270
VX-210 /246 /400/410/414/417/418/ VX-420A/424/427/428/ VX-800 FT-60R /250/250R / HX-270S/370S/500S/600S
VXA-150 / 200 Aviator Pilot II/ 210/220 Pro VI/ 300 Pilot III, etc
FTA-230 / 310
HX-270S / 370S / 500S / 600S, etc
BM-1-PL - Komunica professional base reinforced Maximum grip12cm diameterSO-239 connectorRG-58 cable (5mts)
Switching Power Supply, 25A continuos + DIGITAL PANEL. Extraflat version.
SWR & Watt meter, cross needles,140-525 MHz. 0.5-150 W.
Antenna for walkie VHF-UHF, RX 120,150,300,800 Y 900 MHZ, 10W, 220MM. SMAF
Home Station or Portable Antenna for Local SSB / CW / Digital Mode Use or for Satellite Operation.
Half Wave Dipole bent into a Square Loop, Super Light Weight, High Gain, Mounted Horizontally.
Antenna for walkie VHF-UHF, RX 120,150,300,800 Y 900 MHZ, 2.15 dbi A 430Mhz.,10W, SMA
SWR & Watt meter cross needles 1.8-200 MHz. 0.5-300 W
English
Español