Switching power supply 25A with noise filter & instruments. Output voltage regulable from 4,0V-16V (DC).
Switching Power Supply, 25A continuos + DIGITAL PANEL. Extraflat version.
Add to compare0
Add to wishlist(1)
Specifications
Output Current |
Máx 25 amps, continuos 22 amps |
Input Voltage |
AC 90~125 or AC 200~240 inside selectable |
Output Voltage |
AV-825-DP DC 0.5V~16V |
Output Voltage Regulation |
Less than 1% |
Ripple |
Less than 9m VP-P with nominal load |
Dimentions (L·W·H) |
165 X 147 X 55 mm |
Weight |
1.2 Kg |
Protection
Short circuit protection |
It will reduce the output voltage to 0.1VA down to 0.4A and the warning light will turn on when this condition is removed. It will automatically reset the power supply to its normal condition |
|
Overload protection |
Same as above |
|
Overvoltage protection (if it exceeds DC 16V) |
Same as above |
|
Overheat protection |
AV-800-DP series has two-stage overheat protection function |
Output Current
AV-825DP: Max 25 amps, continuous 22 amps
EAN:8435757700910
Related Products
AV-825-Z (0-24 A) Switching Power Supply
Switching power supply 25AMP with battery-charger connection + 2 instruments + output voltage regulable from 4,0V-16V (DC).
Switching power supply 25AMPS with battery-charger connection. Output voltage fixed 13,8V.
5 other products in the same category:
Switching power supply 25AMPS with battery-charger connection. Output voltage fixed 13,8V.
Power Supply 35 Amps with instruments, regulable.
Advanced switch-mode technology & Reliable power with minimum weight and size
Switching power supply 25AMP with battery-charger connection + 2 instruments + output voltage regulable from 4,0V-16V (DC).
Customers who bought this product also bought:
12 Bands ultralight HF portable antenna with telescopic whip.
Band coverage: 6/10/12/15/17/20/30/40/80/160 m (coil) + VHF + Air Band
Ideal QRP, SOTA, etc.
Compatible to:
YAESU/VERTEX
VX-200, VX-500, VX-510, VX-520, FT-23, FT-41, FT-26, FT-415, VX-310ICOM IC-F3, IC-F3S, IC-F4, IC-F4S, IC-F10, IC-F20, IC-H2, IC-H6, IC-J12, IC-M5, IC-U12, IC-U16, IC-F30G, IC-F31, IC-F4TR, IC-F4008, IC-F4088A, IC-Q7A, IC-T2H, IC-T7H, IC-T22, IC-T42A, IC-T42E, IC-2GAT, IC-91, IC-M5, IC-4008A, IC-4088A
MAXON SL25, SL55, SL70, SP-100, SP-120, SP-130, SP-140
Single desk charger for Vertex radios.:
•Rapid Charge: Charge times of between 1 and 3 hours depending onbattery type.•Suitable for charging Nickel Cadmium (Ni-Cd), Nickel Metal Hydride (Ni-MH)and Lithium-ion (Li-ion) battery packs.•Short circuit protection and temperature protection.
This product has a new reference, until now it has corresponded to PWR-RH-795
Telescopic antenna for walkie VHF-UHF.
Radiant Antenna Turbo 800 PL. Supplied without cable RG58 and without base PL SO239 (See images).Blue Line series.Includes 90º articulated Turbo base with exclusive quick-lock system. High performance.Length +/- 84 cm. Conical rod in stainless steel with coil.Connector on the base UHF-Male (PL259). It is threaded or directly coupled on any standard SO239 base.
Compatible with Icom series:
IC-705
ID-31A, ID-31E, ID-51E, etc.
IC-31A, IC-31E, IC-51A, IC-51E, IP-100-H, etc
Antenna base made by fiber glass 144-430-1200MHz with Maximum Power Rating 100W, 1900MM
TETRA & UHF 380 ÷ 430MHz
Its design provides an optimal anchorage and adhesion to the vehicle chassis to off er low ROE and good antenna performance.
Compact size, specially designed for small size mobile antennas.
Desk microphone HF/VHF/UHF: compressor & meter
It includes:
1 Extendable Telescopic Tripod 4 sections in Aluminium
1 Galvanized Iron Sheet Plate with Professional Base SO-239
2 Kits of ground not tuned x 4 wires of 3m prepared for fixing by picks
1 pig-tail 5.5m of low-loss cable RG-58 for connecting the base (sheet plate) to the transceiver antenna connector (PL-259).
Various screws
Ideal for antennas with SMA male connector (SMA type)
7cm diameter flat magnetic baseHigh magnetic adhesionRG-58 cable (5mts)
Mobile Antenna Tetra UHF 375÷480 MHz
Flexible